Process Data set: AMALJ-TT E Path 3x400/50 ALCL 12kV lcAL (no) en
Process information
| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | Sweden |
| Reference year | 2025 |
| Name |
|
| Technical purpose of product or process | Totally water sealed three core power cable designed for installation in air, direct in ground and in water (with limited depth and moderate currents). Included in the E Path concept, the cable is evaluated and designed with sustainability in mind. The outer sheath is of 90% recycled (post-consumer scrap) and as insulation system the cable uses Prysmians premium thermoplastic material: P-laser that ensure outstanding performance and recyclability. Radially water sealed byan aluminium laminate bonded to the outer sheath and longitudinally water sealed with swellable tapes.The screen is made up of circular corrosion protected aluminium wires that are covered with a semi-conductive material. By using the two strong ripcords stripping of the jacket becomes easier and safer for both man and cable. Conductor design Stranded, round, compacted aluminum class 2, longitudinal water sealed Conductor material Aluminium Inner semi-conducting layer Yes Core insulation material Polypropylene Outer semi-conducting layer Yes Screen construction Aluminum wire Material outer sheath MDPE Laminated sheath Yes Longitudinal water blocking screen Yes Rip cord Yes UV resistant Yes |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-11-30 - 2030-11-30 |
| Technological representativeness | |
| Technology description including background system | AMALJ-TT E Path 3x400/50 ALCL 12kV lcAL SAP code: 20496468 STANDARDS, CERTIFICATIONS AND APPROVALS: SS 424 14 20 Construction standard 12-36 kV CENELEC HD 620 Part 12 Section M Harmonized construction and testing standard IEC 60228 Construction standard |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-11-30T21:18:01 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | dcb7e746-2f27-4119-892f-fbd49ba16248 |
| Date of last revision | 2025-10-06T14:04:23.8875435Z |
| Data set version | 00.02.001 |
| Registration authority | |
| Registration number | NEPD-12567-12706 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle